Computing-Aware Traffic Steering B. Zhang, Ed. Internet-Draft Pengcheng Laboratory Intended status: Standards Track 27 July 2026 Expires: 28 January 2027 CATS Service Metric Agent (C-SMA) Functional Implementation draft-zhangb-cats-csma-implementation-00 Abstract The Computing-Aware Traffic Steering (CATS) framework introduces the CATS Service Metric Agent (C-SMA) as the functional entity responsible for collecting service capabilities and status, and reporting them to CATS Path Selectors (C-PSes). While existing drafts define the metrics and high-level framework, the concrete functional behavior, internal architecture, and operational procedures of the C-SMA remain underspecified. This document fills that gap by defining the functional implementation of the C-SMA. Specifically, it specifies how the C-SMA collects metrics from multiple Service Contact Instances (SCIs) within a service site; how it validates, and caches these metrics; how it adapts to various control-plane protocols for metric distribution; how it enforces local policies and security policies; and how it maintains synchronization with the C-PS under dynamic conditions. This document complements [I-D.ietf-cats-framework] and [I-D.zhangb-cats-service-metrics-op] by providing the operational execution layer for the C-SMA. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 28 January 2027. Zhang Expires 28 January 2027 [Page 1] Internet-Draft CATS C-SMA Functional Implementation July 2026 Copyright Notice Copyright (c) 2026 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1. Requirements Language . . . . . . . . . . . . . . . . . . 4 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. C-SMA Functional Architecture . . . . . . . . . . . . . . . . 5 3.1. C-SMA Position in CATS Framework . . . . . . . . . . . . 6 4. Metric Collection from SCIs . . . . . . . . . . . . . . . . . 7 4.1. Collection Interface . . . . . . . . . . . . . . . . . . 7 4.2. Metric Validation and Sanitization . . . . . . . . . . . 7 5. Metric Caching and State Management . . . . . . . . . . . . . 8 5.1. Local Metric Cache . . . . . . . . . . . . . . . . . . . 8 5.2. Soft-State and Aging . . . . . . . . . . . . . . . . . . 9 5.3. Per-SCI State Tracking . . . . . . . . . . . . . . . . . 9 6. Control-Plane Protocol Adaptation . . . . . . . . . . . . . . 9 6.1. Centralized Model: Northbound Interface . . . . . . . . . 10 6.2. Distributed Model: Routing Protocol Extensions . . . . . 10 6.3. Hybrid Model: Combined Approach . . . . . . . . . . . . . 11 7. Policy Enforcement . . . . . . . . . . . . . . . . . . . . . 11 7.1. Local Policy Engine . . . . . . . . . . . . . . . . . . . 11 7.2. Metric Transformation Policies . . . . . . . . . . . . . 11 7.3. Update Control Policies . . . . . . . . . . . . . . . . . 12 8. Security and Trust Management . . . . . . . . . . . . . . . . 12 8.1. SCI Authentication . . . . . . . . . . . . . . . . . . . 12 8.2. C-PS Authentication . . . . . . . . . . . . . . . . . . . 13 8.3. Metric Integrity and Freshness . . . . . . . . . . . . . 13 9. Dynamic Synchronization . . . . . . . . . . . . . . . . . . . 13 9.1. Trigger-Based Updates . . . . . . . . . . . . . . . . . . 13 9.2. Periodic Synchronization . . . . . . . . . . . . . . . . 14 9.3. Recovery and Reconciliation . . . . . . . . . . . . . . . 14 10. Failure Handling . . . . . . . . . . . . . . . . . . . . . . 15 10.1. SCI Failure Detection . . . . . . . . . . . . . . . . . 15 10.2. C-PS Unreachability . . . . . . . . . . . . . . . . . . 15 10.3. Partitioned Operation . . . . . . . . . . . . . . . . . 16 Zhang Expires 28 January 2027 [Page 2] Internet-Draft CATS C-SMA Functional Implementation July 2026 11. Scalability Considerations . . . . . . . . . . . . . . . . . 16 12. Security Considerations . . . . . . . . . . . . . . . . . . . 16 13. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 17 14. References . . . . . . . . . . . . . . . . . . . . . . . . . 17 14.1. Normative References . . . . . . . . . . . . . . . . . . 17 14.2. Informative References . . . . . . . . . . . . . . . . . 18 Appendix A. Acknowledgments . . . . . . . . . . . . . . . . . . 19 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 19 1. Introduction The Computing-Aware Traffic Steering (CATS) framework [I-D.ietf-cats-framework] defines the CATS Service Metric Agent (C-SMA) as a functional component that gathers information about service sites and server resources, as well as the status of the different service instances. The C-SMA advertises these metrics to CATS Path Selectors (C-PSes) to enable compute-aware traffic steering decisions. However, the framework does not specify: * How a C-SMA collects metrics from multiple Service Contact Instances (SCIs) within a service site. * How a C-SMA validates, and caches metrics before reporting. * How a C-SMA adapts to different control-plane deployment models (centralized, distributed, hybrid). * How a C-SMA enforces local policies, security policies, and update control policies. * How a C-SMA handles failures, partitions, and recovery scenarios. This document defines the functional implementation of the C-SMA to address these gaps. It specifies the internal architecture, metric collection and validation mechanisms, protocol adaptation, policy enforcement, and failure handling required for a C-SMA to operate effectively within the CATS framework. The C-SMA acts as the bridge between the service site (and its SCIs) and the CATS control plane. It is responsible for: * Collecting metrics from one or more SCIs within the service site. * Validating and sanitizing metrics to prevent erroneous or malicious data from influencing traffic steering. Zhang Expires 28 January 2027 [Page 3] Internet-Draft CATS C-SMA Functional Implementation July 2026 * Caching metrics and maintaining soft-state to handle transient failures. * Adapting to the control-plane protocol used in the deployment (RESTful API, BGP-LS, GRASP, etc.). * Enforcing local policies (e.g., metric transformation, update throttling, security labels). * Authenticating SCIs and C-PSes, and protecting metric integrity. * Handling failures of SCIs, C-PSes, and network partitions. 1.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 2. Terminology This document makes use of the terms defined in [I-D.ietf-cats-framework] and [I-D.zhangb-cats-service-metrics-op]. In particular: * CS-ID (CATS Service ID): An identifier for a service. * CSCI-ID (CATS Service Contact Instance ID): An identifier for a service contact instance. * Global Available Slots (GAS): The maximum number of concurrent requests a service site is willing and able to serve for a specific CS-ID at a given time. * Computing Time: The time required for the site to perform one service request. * C-SMA (CATS Service Metric Agent): The functional entity that collects service metrics and advertises them to C-PSes. * C-PS (CATS Path Selector): The functional entity that selects paths towards service sites and instances. Additionally, the following terms are used in this document: Zhang Expires 28 January 2027 [Page 4] Internet-Draft CATS C-SMA Functional Implementation July 2026 * Service Site: A location that hosts one or more SCIs and their underlying service instances. * SCI Report: A message sent by an SCI to the C-SMA containing aggregated metrics and status. * Metric Cache: A local data structure maintained by the C-SMA to store the most recent metrics from each SCI. * Update Trigger: An event that causes the C-SMA to send a metric update to the C-PS. * Policy Engine: The component within the C-SMA that evaluates and enforces local policies on metric reporting. * Protocol Adapter: The component within the C-SMA that adapts internal metric representations to the wire format required by the control-plane protocol. 3. C-SMA Functional Architecture A C-SMA is logically composed of the following internal functional components: +----------------------------------------------------------------+ | CATS Service Metric Agent (C-SMA) | | +----------------+ +------------------+ | | | SCI Collection | | policy Engine | | | | Interface (SI) |------------ | (PE) | | | +--------+-------+ | +--------+---------+ | | | | | | | +--------v-------+ +--------v-------+ +------v-----------+ | | | Metric Cache | | Validator & | | Update Controller| | | | (MC) | | Sanitizer (VS) | | (UC) | | | +--------+-------+ +--------+-------+ +------+-----------+ | | | | | | | +--------v-------------------v-------------------v----------+ | | | Protocol Adapter (PA) | | | +---------------------------+-------------------------------+ | | | | +------------------------------v----------------------------------+ | +-------v--------+ | C-PS | +----------------+ Figure 1: C-SMA Internal Functional Components Zhang Expires 28 January 2027 [Page 5] Internet-Draft CATS C-SMA Functional Implementation July 2026 The internal components of a C-SMA are defined as follows: SCI Collection Interface (SI): Responsible for receiving metric reports from SCIs within the service site. It supports multiple transport protocols (e.g., gRPC, HTTP/2, MQTT, internal message bus) and manages the lifecycle of SCI connections. Metric Cache (MC): Responsible for storing the most recent metrics from each SCI. It provides fast lookup for the MA, PE, and UC. The cache implements time-to-live (TTL) and soft-state aging to handle stale data. Validator & Sanitizer (VS): Responsible for validating incoming SCI reports for correctness and sanity. It checks for out-of-range values, sudden anomalous changes, duplicate or out-of-sequence reports, and format compliance. Invalid reports are logged and optionally dropped or quarantined. Policy Engine (PE): Responsible for enforcing local policies on metric reporting. Policies include metric transformation, security label assignment or verification, cost and reputation policies, and update suppression during maintenance windows. Update Controller (UC): Responsible for determining when and how often to send updates to the C-PS. It implements threshold-based, event-based, and periodic update policies. It also implements rate limiting and burst control. Protocol Adapter (PA): Responsible for adapting internal metric representations to the wire format required by the control-plane protocol. It supports multiple protocols (e.g., RESTful API, BGP- LS, GRASP, NETCONF/YANG-Push) and can be extended for new protocols. 3.1. C-SMA Position in CATS Framework The C-SMA sits between the service site (SCIs) and the CATS control plane (C-PS). Its relationships with other CATS components are: * The C-SMA receives metric reports from one or more SCIs within the service site. * The C-SMA validates, and caches these metrics. * The C-SMA advertises metrics to the C-PS via the control-plane protocol. Zhang Expires 28 January 2027 [Page 6] Internet-Draft CATS C-SMA Functional Implementation July 2026 * The C-SMA does not directly interact with clients, C-TCs, or CATS- Forwarders. * The C-SMA may be co-located with an SCI, an Egress CATS-Forwarder, or deployed as a standalone component within the service site. The C-SMA is the authoritative source of computing metrics for the service site. The C-PS relies on the C-SMA's reports to build the Computing Service Table. 4. Metric Collection from SCIs The SCI Collection Interface (SI) receives metric reports from SCIs. The interface supports the following modes: 4.1. Collection Interface Push Mode (Recommended): SCIs proactively push metric reports to the C-SMA at configurable intervals or upon significant changes. This reduces polling overhead and enables near-real-time updates. The SI MUST support at least one of the following push transports: gRPC streaming (bidirectional), HTTP/2 with Server-Sent Events (SSE), MQTT publish/subscribe, or Internal message bus (e.g., Kafka, RabbitMQ). Pull Mode: The C-SMA periodically queries SCIs for metrics. This is useful when SCIs cannot initiate connections (e.g., behind NAT or firewall). The SI MUST support HTTP GET or gRPC unary calls for pull mode. Hybrid Mode: A combination of push and pull. SCIs push routine updates, and the C-SMA pulls on-demand during recovery or anomaly detection. The SI MUST support multiple concurrent SCI connections. Each connection is identified by the CSCI-ID and authenticated. 4.2. Metric Validation and Sanitization The Validator & Sanitizer (VS) inspects every incoming SCI report before it enters the Metric Cache. The VS performs the following checks: Range Validation: Each metric value MUST fall within a valid range: GAS: 0 to MAX_UINT32; Computing Time: 0 to 3600000 ms (1 hour); Cost: 0 to MAX_UINT32; Reputation: 0 to 10; Security Label: 0 to 10. Values outside these ranges are rejected. Zhang Expires 28 January 2027 [Page 7] Internet-Draft CATS C-SMA Functional Implementation July 2026 Rate-of-Change Validation: The VS detects anomalous changes: GAS change > 50% within 1 second without corresponding health change; Computing Time change > 100% within 1 second; Health status flapping (> 3 transitions within 10 seconds). Anomalous reports MAY be quarantined for manual review or accepted with a warning flag. Sequence Validation: The VS checks the sequence number or timestamp to detect duplicate, out-of-order, or replayed reports. Old reports are discarded. Cross-Metric Consistency: The VS checks consistency across metrics: If all SCIs are UNHEALTHY, Site_GAS MUST be 0; If Site_GAS > 0, at least one SCI MUST be HEALTHY; Computing Time SHOULD be > 0 if GAS > 0. Sanitization: The VS MAY apply smoothing filters (e.g., moving average) to reduce noise in frequently fluctuating metrics. 5. Metric Caching and State Management The Metric Cache (MC) stores the most recent validated metrics from each SCI. The cache is organized as follows: +===============+=======+=====+================+===============+ | CSCI-ID | CS-ID | GAS | Comp Time (ms) | Health Status | +===============+=======+=====+================+===============+ | 188.3.67.3:67 | AR1 | 400 | 5 | HEALTHY | +---------------+-------+-----+----------------+---------------+ | 188.3.67.3:68 | AR2 | 100 | 15 | HEALTHY | +---------------+-------+-----+----------------+---------------+ | 188.3.67.4:69 | AR1 | 600 | 6 | HEALTHY | +---------------+-------+-----+----------------+---------------+ | 188.3.67.4:70 | LLM1 | 300 | 12 | DEGRADED | +---------------+-------+-----+----------------+---------------+ Table 1: Metric Cache Structure 5.1. Local Metric Cache Each entry includes: CSCI-ID and CS-ID; all reported metrics (GAS, Computing Time, optional metrics); Health status; Timestamp of last update; Sequence number of last report; TTL (time-to-live) for soft- state aging. The MC provides O(1) lookup by CSCI-ID and supports range queries by CS-ID for aggregation. Zhang Expires 28 January 2027 [Page 8] Internet-Draft CATS C-SMA Functional Implementation July 2026 5.2. Soft-State and Aging The MC implements soft-state aging to handle SCI failures or network partitions: TTL-Based Expiration: Each cache entry has a TTL (e.g., 2x the expected reporting interval). If no update is received within the TTL, the entry is marked as STALE. STALE Handling: When an entry becomes STALE, the C-SMA MAY send a pull request to the SCI. If no response is received within a grace period, the SCI is marked as UNHEALTHY and its GAS contribution is set to 0. The C-SMA sends an update to the C-PS reflecting the reduced capacity. Hard-State vs. Soft-State: The C-SMA maintains hard-state for static information (e.g., CS-ID to CSCI-ID mappings) and soft-state for dynamic metrics (e.g., GAS, Computing Time). Cache Size Management: The MC MUST implement a maximum cache size. When the limit is reached, the least-recently-used (LRU) entries are evicted. Eviction of an entry triggers a withdrawal advertisement to the C-PS. 5.3. Per-SCI State Tracking The C-SMA maintains a state machine for each SCI: * ACTIVE: The SCI has been discovered but not yet confirmed healthy. * HEALTHY: The SCI is reporting metrics normally. * STALE: No report received within TTL. The C-SMA attempts recovery. * FAILED: The SCI is considered unreachable. Its metrics are withdrawn. State transitions trigger updates to the C-PS as appropriate. 6. Control-Plane Protocol Adaptation The Protocol Adapter (PA) supports multiple control-plane protocols for different deployment models. Zhang Expires 28 January 2027 [Page 9] Internet-Draft CATS C-SMA Functional Implementation July 2026 6.1. Centralized Model: Northbound Interface In the centralized model (e.g., SDN controller), the C-SMA acts as an application that reports metrics to a centralized C-PS via a northbound interface. The PA supports: RESTful API (HTTP/HTTPS): The C-SMA sends metric reports as JSON or XML payloads to the C-PS REST API endpoint. Supported operations include POST /cats/metrics (publish a new or updated metric set), PUT /cats/metrics/{csci-id} (update metrics for a specific CSCI- ID), DELETE /cats/metrics/{csci-id} (withdraw metrics for a failed SCI), and GET /cats/metrics/{csci-id} (retrieve cached metrics for reconciliation). gRPC: The C-SMA establishes a gRPC stream to the C-PS for bidirectional communication. This enables streaming metric updates from C-SMA to C-PS, streaming policy updates or queries from C-PS to C-SMA, and efficient binary encoding using Protocol Buffers. NETCONF/YANG-Push: The C-SMA publishes metrics as YANG-modeled data via NETCONF notifications or YANG-Push. This is suitable for deployments that already use NETCONF for network management. The PA MUST support TLS for all northbound connections. 6.2. Distributed Model: Routing Protocol Extensions In the distributed model, the C-SMA distributes metrics via routing protocol extensions. The PA supports: BGP-LS with CATS Extensions: The C-SMA injects CATS metrics into BGP-LS as new node or link attributes. The PA maps internal metrics to BGP-LS TLVs: GAS -> CATS-GAS-TLV (TBD), Computing Time -> CATS-COMP-TIME-TLV (TBD), CS-ID -> CATS-CS-ID-TLV (TBD), CSCI- ID -> CATS-CSCI-ID-TLV (TBD). GRASP: The C-SMA uses GRASP to negotiate and distribute CATS metrics among autonomic nodes. The PA maps metrics to GRASP objectives: Objective: "CATS:ServiceMetrics", Payload: CBOR-encoded metric set. OSPF/IS-IS TE Extensions: The C-SMA MAY use IGP TE extensions to carry metrics within the routing domain. This is suitable for deployments where the C-PS is co-located with an Ingress CATS- Forwarder. Zhang Expires 28 January 2027 [Page 10] Internet-Draft CATS C-SMA Functional Implementation July 2026 The PA MUST implement protocol-specific rate limiting and dampening to prevent routing instability. 6.3. Hybrid Model: Combined Approach In the hybrid model, the C-SMA uses a combination of centralized and distributed mechanisms: * Static/Capability Metrics via Distributed Protocols: Infrequently changing metrics (e.g., maximum capacity, security labels) are distributed via BGP-LS or GRASP. * Dynamic/Status Metrics via Centralized Interface: Frequently changing metrics (e.g., GAS, Computing Time) are reported via the RESTful or gRPC northbound interface to avoid flooding the routing protocol. The PA MUST ensure consistency between the two channels. If a conflict is detected (e.g., BGP-LS advertises GAS=500 while the REST API reports GAS=400), the more recent update takes precedence. 7. Policy Enforcement The Policy Engine (PE) enforces local policies on metric reporting. Policies are expressed as rules with conditions and actions. 7.1. Local Policy Engine Rule Format: IF THEN Examples: IF Site_GAS < 100 THEN SET Security_Label = 5; IF SCI_Health = DEGRADED THEN REDUCE SCI_GAS BY 50%; IF Time IN Maintenance_Window THEN SUPPRESS_UPDATES; IF Cost > 100 THEN SET Cost = 100. Policies are configured via the CATS Management Plane (e.g., NETCONF, RESTCONF) and stored in a local policy database. The PE evaluates policies in order of priority before metrics are sent to the C-PS. 7.2. Metric Transformation Policies The PE applies the following transformation policies: Safety Margin: Reduce reported GAS by a configured percentage to prevent over-subscription. Example: Reported_GAS = Site_GAS * 0.8. Ceiling/Floor: Enforce upper and lower bounds on metrics. Example: Zhang Expires 28 January 2027 [Page 11] Internet-Draft CATS C-SMA Functional Implementation July 2026 Computing Time MUST be >= 1 ms and <= 10000 ms. Smoothing: Apply exponential moving average (EMA) to reduce noise: Smoothed_GAS(t) = alpha * Raw_GAS(t) + (1 - alpha) * Smoothed_GAS(t-1), where alpha is a configurable smoothing factor (default 0.3). 7.3. Update Control Policies The PE controls when updates are sent to the C-PS: Threshold Policies: GAS delta > 10% or absolute delta > 50; Computing Time delta > 20%; Health status change; Security label change. Time-Based Policies: Maximum update interval: force an update at least every 60 seconds (heartbeat); Minimum update interval: suppress updates more frequent than 5 seconds (rate limiting); Maintenance window: suppress all non-critical updates during scheduled maintenance. Burst Control: Token bucket algorithm to limit update rate; Backoff algorithm for repeated failures. 8. Security and Trust Management The C-SMA MUST authenticate every SCI before accepting its reports. Supported methods: 8.1. SCI Authentication Mutual TLS (mTLS): The SCI and C-SMA exchange X.509 certificates during connection establishment. The C-SMA validates the SCI's certificate against a trusted CA and checks that the certificate subject matches the expected CSCI-ID. Token-Based: The SCI includes a signed token (e.g., JWT) in each report. The C-SMA validates the token signature, expiration, and issuer. IPsec: For deployments where SCIs and C-SMA communicate over an untrusted network, IPsec MAY be used to protect the entire communication channel. The C-SMA MUST maintain a certificate revocation list (CRL) or support OCSP to check for revoked certificates. Zhang Expires 28 January 2027 [Page 12] Internet-Draft CATS C-SMA Functional Implementation July 2026 8.2. C-PS Authentication The C-SMA MUST authenticate the C-PS before sending updates. Supported methods: Mutual TLS (mTLS): The C-SMA validates the C-PS certificate during northbound connection establishment. Pre-Shared Key (PSK): For lightweight deployments, the C-SMA and C-PS MAY use a pre-shared key for message authentication (e.g., HMAC-SHA256). The C-SMA MUST verify that the C-PS is authorized to receive the metrics for the advertised CS-IDs. This MAY be enforced via certificate attributes or policy configuration. 8.3. Metric Integrity and Freshness The C-SMA MUST protect the integrity of metric reports: Digital Signature: Each report sent to the C-PS is signed using the C-SMA's private key. The C-PS verifies the signature using the C-SMA's public key. Message Authentication Code (MAC): For deployments using PSK, a MAC (e.g., HMAC-SHA256) is appended to each report. Timestamp and Nonce: Each report includes a timestamp and a monotonically increasing nonce to prevent replay attacks. The C-PS MUST reject reports with timestamps outside a reasonable window (e.g., +/- 30 seconds) or duplicate nonces. Freshness Indicator: The C-SMA includes a freshness indicator (e.g., sequence number or epoch) in each report. The C-PS uses this to detect stale or out-of-order updates. 9. Dynamic Synchronization The Update Controller (UC) sends updates to the C-PS based on triggers and periodic synchronization. 9.1. Trigger-Based Updates The UC sends updates to the C-PS based on the following triggers: * Metric Change Trigger: When an aggregated metric crosses a configured threshold, the UC sends a delta update. Zhang Expires 28 January 2027 [Page 13] Internet-Draft CATS C-SMA Functional Implementation July 2026 * Health Change Trigger: When an SCI changes health state (HEALTHY -> DEGRADED, DEGRADED -> UNHEALTHY, etc.), the UC sends an immediate update. * SCI Discovery Trigger: When a new SCI is discovered or an existing SCI is withdrawn, the UC sends a full update. * Policy Change Trigger: When a local policy is updated (e.g., new safety margin), the UC re-evaluates all metrics and sends updates as needed. The UC MUST prioritize triggers. Critical triggers (e.g., health change) take precedence over routine triggers (e.g., metric change). 9.2. Periodic Synchronization The UC sends periodic updates to maintain soft state: Heartbeat: A full metric snapshot is sent at a fixed interval (e.g., every 60 seconds) even if no triggers have fired. This ensures the C-PS does not age out the C-SMA's entries. Refresh: If the C-PS supports it, the C-SMA MAY use a lightweight refresh message (e.g., keepalive) to extend the C-PS's cache TTL without retransmitting all metrics. Synchronization Interval: The heartbeat interval SHOULD be configurable and MAY be adjusted dynamically based on network conditions or C-PS load. 9.3. Recovery and Reconciliation After a C-PS restart or network partition, the C-SMA and C-PS MUST reconcile their state: Full Sync: The C-SMA sends a complete snapshot of all metrics to the C-PS upon reconnection. Incremental Sync: If the C-PS has persisted some state, the C-SMA MAY send only the changes since the last acknowledged sequence number. Reconciliation Protocol: The C-PS MAY request a full sync by sending a synchronization request to the C-SMA. The C-SMA responds with all current metrics. Conflict Resolution: If the C-PS and C-SMA have divergent state Zhang Expires 28 January 2027 [Page 14] Internet-Draft CATS C-SMA Functional Implementation July 2026 (e.g., due to message loss), the C-SMA's view takes precedence as the authoritative source. 10. Failure Handling The C-SMA detects SCI failures through the following mechanisms: 10.1. SCI Failure Detection Missing Reports: If an SCI fails to send reports within the TTL, the C-SMA marks it as STALE and then FAILED. Health Monitor Integration: The C-SMA MAY integrate with an external health monitor (e.g., the SCI's own health checks or a site-wide monitoring system) to detect failures faster than TTL-based detection. Active Probing: The C-SMA MAY send active probes (e.g., ping, HTTP GET) to unresponsive SCIs to distinguish between SCI failure and network partition. Upon detecting an SCI failure, the C-SMA: 1. Sets the SCI's GAS contribution to 0. 2. Updates the aggregated site metrics. 3. Sends an immediate update to the C-PS. 4. Logs the failure for operational analysis. 10.2. C-PS Unreachability If the C-SMA cannot reach the C-PS: Retry with Backoff: The C-SMA retries with exponential backoff (e.g., 1s, 2s, 4s, 8s, ... up to a maximum of 60s). Buffering: The C-SMA buffers updates in a local queue. When the C-PS becomes reachable, the buffered updates are sent in batch. The buffer MUST have a maximum size; old updates are dropped when the buffer is full. Fallback: In distributed deployments, the C-SMA MAY fall back to an alternative C-PS or advertise metrics via a routing protocol if the primary C-PS is unreachable. Local Action: The C-SMA MAY notify local operators (e.g., via Zhang Expires 28 January 2027 [Page 15] Internet-Draft CATS C-SMA Functional Implementation July 2026 syslog, SNMP trap) of the C-PS unreachability. 10.3. Partitioned Operation During a network partition between the service site and the C-PS: Read-Only Mode: The C-SMA continues to collect and cache metrics from SCIs but stops sending updates to the C-PS. Local Steering: If the C-SMA is co-located with an Egress CATS- Forwarder, it MAY provide local steering decisions using cached metrics until the partition heals. Partition Healing: Upon reconnection, the C-SMA performs a full sync to reconcile state. 11. Scalability Considerations The C-SMA MUST be designed to scale with the number of SCIs and the frequency of metric updates: Horizontal Scaling: In large service sites, multiple C-SMA instances MAY be deployed, each responsible for a subset of SCIs. A coordinator C-SMA aggregates metrics from the subordinate C-SMAs. Metric Compression: The PA SHOULD compress metric payloads (e.g., using gzip, CBOR, or Protocol Buffers) to reduce bandwidth. Update Aggregation: The UC SHOULD batch multiple SCI updates into a single C-PS advertisement to reduce control-plane overhead. Hierarchical Aggregation: In multi-site deployments, site-level C-SMAs report to a domain-level C-SMA, which aggregates across sites before reporting to the C-PS. Selective Reporting: The PE MAY suppress non-critical metrics (e.g., optional extension metrics) during high-load conditions. 12. Security Considerations The C-SMA is a critical trust anchor in the CATS architecture. Its compromise could lead to traffic misdirection or denial of service. The following security measures are REQUIRED: Authentication: The C-SMA MUST authenticate all SCIs and C-PSes. Authorization: The C-SMA MUST verify that SCIs are authorized to Zhang Expires 28 January 2027 [Page 16] Internet-Draft CATS C-SMA Functional Implementation July 2026 report metrics for their claimed CS-IDs. The C-SMA MUST verify that C-PSes are authorized to receive metrics for the advertised CS-IDs. Integrity: All metric reports MUST be integrity-protected. Confidentiality: Metric reports SHOULD be encrypted to prevent disclosure of internal service topology and capacity. Availability: The C-SMA MUST be resilient to DoS attacks (e.g., excessive SCI reports, replay attacks). Rate limiting, burst control, and input validation are REQUIRED. Audit: The C-SMA MUST log all authentication failures, policy violations, and anomalous metric changes for security audit. 13. IANA Considerations This document has no IANA actions at this time. 14. References 14.1. Normative References [I-D.ietf-cats-framework] Li, C., Du, Z., and M. Boucadair, "A Framework for Computing-Aware Traffic Steering (CATS)", Work in Progress, Internet-Draft, draft-ietf-cats-framework-22, March 2026, . [I-D.zhangb-cats-service-metrics-op] Zhang, B., Dai, Y., and Z. Du, "Computing Service Metric Definitions and Operation under CATS", Work in Progress, Internet-Draft, draft-zhangb-cats-service-metrics-op-03, July 2026, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997, . [RFC6241] Enns, R., Bjorklund, M., and J. Schoenwaelder, "Network Configuration Protocol (NETCONF)", RFC 6241, June 2011, . Zhang Expires 28 January 2027 [Page 17] Internet-Draft CATS C-SMA Functional Implementation July 2026 [RFC7471] Giacalone, S., Ward, D., and J. Drake, "OSPF Traffic Engineering (TE) Metric Extensions", RFC 7471, March 2015, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, May 2017, . [RFC8570] Ginsberg, L., Previdi, S., and S. Giacalone, "IS-IS Traffic Engineering (TE) Metric Extensions", RFC 8570, March 2019, . [RFC8571] Ginsberg, L., Previdi, S., and Q. Wu, "BGP - Link State (BGP-LS) Advertisement of IGP Traffic Engineering Performance Metric Extensions", RFC 8571, March 2019, . [RFC8639] Voit, E., Clemm, A., and A. Gonzalez Prieto, "Subscription to YANG Notifications", RFC 8639, September 2019, . [RFC8990] Bormann, C., Carpenter, B., and B. Liu, "GeneRic Autonomic Signaling Protocol (GRASP)", RFC 8990, March 2021, . 14.2. Informative References [I-D.ietf-cats-metric-definition] Kehan, Y. and C. Li, "CATS Metrics Definition", Work in Progress, Internet-Draft, draft-ietf-cats-metric- definition-10, June 2026, . [I-D.zhangb-cats-cmas] Zhang, B., Dai, Y., and Z. Du, "Public Service Platform for Computing-Aware Traffic Steering (CATS)", Work in Progress, Internet-Draft, draft-zhangb-cats-cmas-04, May 2026, . [RFC4760] Bates, T., Chandra, R., and D. Katz, "Multiprotocol Extensions for BGP-4", RFC 4760, January 2007, . Zhang Expires 28 January 2027 [Page 18] Internet-Draft CATS C-SMA Functional Implementation July 2026 [RFC7149] Boucadair, M. and C. Jacquenet, "Software-Defined Networking: A Perspective from within a Service Provider Environment", RFC 7149, March 2014, . [RFC7426] Haleplidis, E., Pentikousis, K., and S. Denazis, "Software-Defined Networking (SDN): Layers and Architecture Terminology", RFC 7426, January 2015, . Appendix A. Acknowledgments The authors thank the CATS working group for their valuable feedback and contributions to this document. Author's Address Bin Zhang (editor) Pengcheng Laboratory Sibilong Street Shenzhen Guangdong, 518055 China Email: zhangb@pcl.ac.cn Zhang Expires 28 January 2027 [Page 19]