NAME

    Tie::Locked -- lock hashes so that they cannot be easily changed

SYNOPSIS

     use Tie::Locked ':all';
     
     # creates locked hash with initial value x=>1
     tie %hash, 'Tie::Locked::Tied', x=>1;
     
     # get tied hashref with initial value x=>1
     my $ref = locked_hashref('x'=>1);
     
     # the following commands cause fatal errors
     print $ref->{'y'};       # references non-existent key
     $ref->{'y'} = 'yyyyy';   # assigns to non-existent key
     $ref->{'x'} = 'yyyyy';   # assigns to existent key
     
     # but this command is ok
     $dummy = $ref->{'x'};    # references existent key
     
     # get unlocked hashref
     my $ref = locked_hashref('x'=>1);
     
     # the following commands do NOT cause errors because the hash isn't locked
     print $ref->{'y'};
     $ref->{'y'} = 'yyyyy';
     
     # now lock the hashref
     $ref->lock;
     
     # many other features...

DESCRIPTION

    Tie::Locked allows you to create hashes in which the values of the hash
    cannot be easily changed. If an element that does not exist is
    referenced then the code croaks. Tie::Locked is useful for situations
    where you want to make sure your code doesn't accidentally change
    values. If code attempts to change or delete an existing element, then
    the code dies.

    I created Tier::Locked when I wrote buggy code something like this:

     my $whatever = {};
    
     # a bunch of code that, under some conditions, never creates or sets
     # the value $whatever->{'done'}
     
     if (! $whatever->{'done'}) {
        ...
     }

    It took an hour of debugging to figure out, so I created this module to
    avoid losing more time from things I'd rather do, like write non-buggy
    code.

    Please note: I never actually use Tie::Locked to tie hashes directly. I
    use locked_hashref() and unlocked_hashref() to get hash references.
    This documentation is going to focus on that usage.

INSTALLATION

    Tie::Locked can be installed with the usual routine:

     perl Makefile.PL
     make
     make test
     make install

FUNCTIONS

 locked_hashref

    locked_hashref() returns a reference to a locked hash. All options sent
    to locked_hashref() are set as the locked values of the hash. So, for
    example, the following code creates a hashref with one key 'x' with a
    value of 1:

     my $ref = locked_hashref('x'=>1);

 unlocked_hashref

    unlocked_hashref() returns a reference to an unlocked hash. This is
    useful for the situation where you want to initialize the values in the
    hash before locking it. For example, the following code creates a
    Tie::Locked object, sets some values in it, then locks the hash.

     my $ref = unlocked_hashref();
     
     $ref->{'Mbala'} = 1;
     $ref->{'Josh'} = 2;
     $ref->{'Starflower'} = 3;
     
     $ref->lock();

 $ref->lock()

    The lock() method (not to be confused with Perl's native lock function)
    locks the Tie::Locked object. For example, the following code creates
    an unlocked Tie::Locked object, sets some values, then locks the hash.

     my $ref = unlocked_hashref();
     
     $ref->{'Mbala'} = 1;
     $ref->{'Josh'} = 2;
     $ref->{'Starflower'} = 3;
     
     $ref->lock();

 $ref->unlock()

    Unlocks the hash. For example, the following code unlocks the hash,
    sets some values, then relocks it.

     $ref->unlock();
     $ref->{'x'} = 'yyyyy';
     $ref->{'z'} = 'yyyyy';
     
     # relock
     $ref->lock;

 $ref->autolocker()

    autolocker() unlocks the hash and returns an object that, when it goes
    out of scope, relocks the hash. This is useful for situations where you
    want to unlock the hash and be sure it gets relocked even if the
    routine exits midway.

    For example, the following code creates an autolocker object in the
    do{} block, so setting the hash does not cause an error in that block.
    However, after the locker has gone out of scope, the hash is locked
    again.

     my $ref = locked_hashref('x'=>1);
     
     do {
        my $locker = $ref->autolocker();
        $ref->{'steve'} = 1; # does not cause an error
     };
     
     $ref->{'fred'} = 2; # causes an error

 $ref->locked()

    Returns true if the hash is locked.

 $ref->unlocked()

    Returns true if the hash is not locked.

 $ref->unlock_fields(field1, field2, ...)

    This method allows you to unlock just specific fields in the hash. For
    example, in the following code, the fields 'first', 'middle', and
    'last' are unlocked, but the id field is not. Notice that the fields do
    not need to actually exist in order to be unlocked.

     # create customer hash
     my $customer = locked_hashref(id=>'3245');
     
     # unlock name fields
     $customer->unlock_fields('first', 'middle', 'last');
     
     # set name fields - does not cause any errors
     $customer->{'first'} = 'Michael';
     $customer->{'middle'} = 'Jadin';
     $customer->{'last'} = 'Forsyth';
     
     # but this line causes an error:
     $customer->{'id'} = 2087;

    Each call to unlock_fields() adds to the list of unlocked fields, so
    the following code accomplishes the same thing as above.

     $customer->unlock_fields('first');
     $customer->unlock_fields('middle');
     $customer->unlock_fields('last');

 $ref->lock_fields(field1, field2, ...)

    The opposite of unlock_fields(), this method locks the given fields.

 $ref->lock_all_fields()

    Locks all fields.

 $ref->unlocked_fields()

    Returns an array of fields that are not locked.

Known bugs

    The autolocker object does not go out of scope if it is created in a
    one-command block. For example, the following code does NOT cause an
    error even though it should.

     my $ref = locked_hashref();
     
     do {
        my $locker = $ref->autolocker();
     };
     
     # does not cause an error
     $ref->{'Steve'} = 4;

TERMS AND CONDITIONS

    Copyright (c) 2013 by Miko O'Sullivan. All rights reserved. This
    program is free software; you can redistribute it and/or modify it
    under the same terms as Perl itself. This software comes with NO
    WARRANTY of any kind.

AUTHORS

    Miko O'Sullivan miko@idocs.com

RELEASE HISTORY

    Version 1.0 March 21, 2013

      Initial release

    Version 1.1 April 25, 2014

      Fixed error in META.yml.